Model 5000Model 5000FLOW-THROUGHFURNACE HUMIDIFIERInstallation/OperatingInstructions
7. After about 5 minutes of running turn your thermostat downso the furnace cycles off. IT IS IMPORTANT TO ALLOW THEFURNACE TO CYCLE OFF VIA THE THERM
OPTIONAL SETTING # 2 (FIG27.)Humidifier ON : A temperature rise of 4°Cin one minute and a temperature greaterthan 30°CHumidifier OFF: A temperature dr
the relative humidity level in the air and work as the mainON/OFF switch to control the humidifier, regardless of whetheryour furnace is on or not. At
FREQUENTLY ASKED QUESTIONSQUESTION: Why use a flow-through style humidifier rather thana drum style humidifier?ANSWER: This will depend on several fac
• READ THESE INSTRUCTIONS FULLY BEFORE INSTALLINGTHIS HUMIDIFIER.• SAVE THESE INSTRUCTIONS FOR REFERENCE.• WHEN DRILLING OR CUTTING INTO DUCTING BEEXT
4. The bypass damper is fully open.5. The humidifier is mounted level on the duct.6. There is nothing inside the duct behind the bypass collar anddamp
1. The bypass collar and damper and the humidifier body areinstalled on the same ducting. This unit will not operate at all,there will be no air-flow
Tilt the cover away from the body slightly (approx. 1/2") andthen lift up the cover to free the hooks at the top of the unit.2. Remove all loose
2. Drill three marked bypass collar mounting holes on thetemplate using a 1/8" drill bit (not supplied)3. Using a 3/8" drill by (not supplie
5. YOU MUST RUN ADRAINAGE TUBE FROMTHIS UNIT. Select aconvenient location forrunning the 1/2" drainagetube, 15 ft supplied.Before you connect the
humidifier cabinet, behind the bypass tube. Connect the twoends of the transformer leads to the humidifier terminalsmarked “24 VAC IN”4. At any point
Commentaires sur ces manuels